籠式系統線性平移組件

Simple Translation Assembly

設計緊湊，含內建平移組件
可針對½"或1"行程進行設定
可搭配使用具有3/8”安裝柄的測微計
Step-by-Step Assembly Instructions Available

TECHSPEC®籠式系統線性平移組件用於為TECHSPEC®籠式系統裝置新增線性平移功能。藉由內建平移組件，可沿籠式支撐桿進行粗調定位。固定至籠式支撐桿後，可以使用測微計驅動裝置進行精細平移。若新增額外彈簧，並將 3mm x 50mm 棒 (#85-470) 更換為兩個 3mm x 75mm (#86-847，另售)，就可以將 ½吋的標準行程延伸為 1 吋。 TECHSPEC®籠式系統線性平移組件提供兩種選擇：簡易平移(利用6mm支撐桿與標準平板)與滾珠軸承平移(利用滾珠軸承滑動以實現低摩擦平移)。

注意: 測微計/驅動機械與6mm支撐桿另售。

技術資訊

Components for Simple Translation Assembly
Description	Quantity	Feature	Stock No.
Micrometer Mount Kit	1 Required	Micrometer Holder	#85-618
		Protective Steel Plate
		#86-838 Compression Springs (2pk)
25mm Standard Cage Plate, M6	2 Required*	One plate is used for travel and second plate is fixed	#85-632
30mm Standard Cage Plate, M6			#85-630
25mm Standard Cage Plate, ¼-20			#85-633
30mm Standard Cage Plate, ¼-20			#85-631
Micrometer or Actuator	1 Required	Choose based on type, travel, and graduation	Customer Selected
Shaft Collar (2pk)	1 Optional	Can be used instead of a fixed plate	#86-845
Compression Springs (2pk)	1 Optional	Used to extend travel range to 1"	#86-838

*Note: Only 1 required if Shaft Collars are used.

Components for Ball Bearing Translation Assembly
Description	Quantity	Feature	Stock No.
Translation Assembly Kit	1 Required	#85-618 Micrometer Mount Kit	#86-847
		#85-620 Travel Bearing Plate
		#85-619 Fixed Bearing Plate
		#85-686 Linear Bearing Bushings (2pk)
		#85-471 3mm Dia x 75mm Length Rod (x2)
Micrometer or Actuator	1 Required	Choose based on type, travel, and graduation	Customer Selected
Compression Springs (2pk)	1 Optional	Used to extend travel range to 1"	#86-838

Compatible Micrometers
Type	Travel	Graduation	Stock No.
Micrometer Drive	0.5"	0.001"	#58-660
Micrometer Drive	25mm	0.01mm	#58-663