eo_logo
  • 國家/地區
  • 您好! 我的帳戶
  • cart   
 
系列ID系列ID用於識別產品系列介紹,使得用戶利用搜索功能就能快速訪問介紹頁面。 #4076
TECHSPEC®組件由愛特蒙特光學設計、指定或製造。進一步瞭解

桿式反射鏡

TECHSPEC® Stemmed Mirrors
TECHSPEC® Stemmed Mirror
TECHSPEC® Stemmed Mirror
TECHSPEC® Stemmed Mirror mounted in a kinematic mount (not included)
TECHSPEC® Stemmed Mirror mounted in a kinematic mount (not included)

TECHSPEC® Stemmed Mirrors

TECHSPEC® Stemmed Mirror

TECHSPEC® Stemmed Mirror

TECHSPEC® Stemmed Mirror mounted in a kinematic mount (not included)

TECHSPEC® Stemmed Mirror mounted in a kinematic mount (not included)

  • 桿式設計可在安裝時減少反射鏡表面承受的應力
  • 單片式熔融石英構造
  • 金屬反射鍍膜
  • 專門設計配合使用TECHSPEC® 圓形動態調整座
×

TECHSPEC®桿式反射鏡為平面反射鏡,可在背面裝設安裝桿,以便安裝至TECHSPEC 動態圓形光學調整座。反射鏡與動態調整座之間的所有接觸都是透過安裝桿,可減少對反射鏡光學表面造成的應力。這類反射鏡採用單片式設計,以熔融石英製造。TECHSPEC 桿式反射鏡在安裝情況下,由於可減少應力,因此表面平整度高於直接安裝在動態調整座的 λ/10 平面反射鏡。這類反射鏡供應時採用標準金屬鍍膜,包括增強型鋁鍍膜、受保護的金鍍膜,以及受保護的銀鍍膜。

A comparison of the aberrations introduced to a λ/10 Stemmed Mirror and a λ/10 First Surface Mirror when mounted in a kinematic mount. As shown, a Stemmed Mirror stays within λ/10 specification up to 12 inoz of torque (“hand-tight”) while a First Surface Mirror becomes out of specification with a surface flatness of λ/5.
A comparison of the aberrations introduced to a λ/10 Stemmed Mirror and a λ/10 First Surface Mirror when mounted in a kinematic mount. As shown, a Stemmed Mirror stays within λ/10 specification up to 12 inoz of torque (“hand-tight”) while a First Surface Mirror becomes out of specification with a surface flatness of λ/5.
Stemmed Mirrors are mounted to kinematic mounts by a stem on
their back surface, resulting in no contact with the edges of the
mirror surface.
Stemmed Mirrors are mounted to kinematic mounts by a stem on their back surface, resulting in no contact with the edges of the mirror surface.

是否需要報價? Add a stock number to begin our two-step quote process.

Edmund Optics Facebook Edmund Optics Twitter Edmund Optics YouTube Edmund Optics LinkedIn Edmund Optics Instagram

×