Edmund Optics 使用 cookies 来优化和增强我们网站的功能和内容。点击"确定 "以获得完整的用户体验,点击 "详细信息 "按钮可查看有关我们使用的 cookie 的其他信息。我们不会出售从营销 cookie 中获得的有关您的信息,我们仅将其用于改善您在Edmund Optics 的体验。
该提供商收集的部分数据用于个性化和衡量广告效果。
该提供商收集的部分数据用于个性化和衡量广告效果。
我们不使用这种类别的 cookie
TECHSPEC®組件由愛特蒙特光學設計、指定或製造。進一步瞭解
TECHSPEC® 鍺 (Ge) 平凸透鏡 (PCX) 採用精密金剛石車削基材,可提供無鍍膜或 3 - 12µm 的各種寬頻抗反射鍍膜選項。鍺(Ge)具有化學惰性、不溶於水、努氏硬度為 780,因此非常適合需要堅固光學元件的國防、安防以及熱成像應用。不過鍺會出現熱失控,因此應在低於 100°C 的溫度下使用,以確保最佳穿透效果。TECHSPEC® 鍺 (Ge) 平凸透鏡 (PCX)直徑為 12.5、25 和 50 mm。鍺的折射率很高(4.003),在沒有抗反射鍍膜的情況下會產生極大的菲涅耳反射損耗。TECHSPEC®鍺(Ge)平凸透鏡可提供無鍍膜或多種寬頻抗反射鍍膜(BBAR),以增強在中波紅外(MWIR)和長波紅外(LWIR)的穿透能力。
鍺特性的更多相關資訊,請查看以下選型指南 紅外(IR)應用的正確材料。
鍺因其高折射率、較大的穿透距離範圍和堅固的機械性能而廣泛應用。鍺的穿透範圍為 2 - 16 μm,且在可見光譜區是不透明的,因此十分適用於紅外雷射應用。但是,鍺會發生熱逸散現象,即隨著溫度的升高,穿透率會降低;事實上,鍺在 100°C 的溫度下幾乎是不透明的,在 200°C 的溫度下則完全沒有穿透性。當設計用於重量敏感系統的設備時,應考慮到鍺的高密度 (5.33 g/cm3) 特性。鍺的努氏硬度 (780) 約為氟化鎂的兩倍,這一特性使其成為有堅固光學元件要求的紅外線應用的理想之選。鍺不會與空氣、水、鹼金屬和酸(硝酸除外)發生反應。
| AR COATED GERMANIUM | |
![]() |
Typical transmission of a 3mm thick Ge window with BBAR (3000-5000nm) coating at 0° AOI. The blue shaded region indicates the coating design wavelengh range, with the following specification: Ravg <3% @ 3000 - 5000nm Data outside this range is not guaranteed and is for reference only. |
![]() |
Typical transmission of a 3mm thick Ge window with BBAR (3000-12000nm) coating at 0° AOI. The blue shaded region indicates the coating design wavelengh range, with the following specification: Ravg <5.0% @ 3 - 12μm Data outside this range is not guaranteed and is for reference only. |
![]() |
Typical transmission of a 3mm thick Ge window with BBAR (8000-12000nm) coating at 0° AOI. The blue shaded region indicates the coating design wavelengh range, with the following specification: Ravg <3.0% @ 8 - 12μm Data outside this range is not guaranteed and is for reference only. |
Germanium optics require special handling and cleaning procedures. Always wear gloves during handling to prevent contamination, and wash hands afterward. Avoid contact between Germanium dust and the eyes, skin, or clothing. When not in use, store optics sealed and covered at temperatures between 20°C and 25°C. Do not expose them to temperatures exceeding 100°C when in use.
愛特蒙特光學(Edmund Optics)為您提供全面的光學和成像元件客製化服務,精準滿足特定應用需求。無論您的專案處於原型開發階段或籌備量產階段,我們都能為您提供靈活的解決方案。從概念設計到產品交付,我們經驗豐富的工程師團隊將為您提供全程支援。
我們的核心能力包括:
or view regional numbers
QUOTE TOOL
enter stock numbers to begin
Copyright 2023, Edmund Optics Inc., 14F., No.83, Sec. 4, Wenxin Road, Beitun District , Taichung City 406, Taiwan (R.O.C.)
Privacy Policy | Cookie Policy | Terms & Conditions | Accessibility
California Consumer Privacy Act (CCPA): Do Not Sell My Information