Product added to cart

4.5mW 655nm Elliptical, Premier Laser Diode

×
Stock #57-112 5-7 Days
×
- +
NT$13,965
Qty 1+
NT$13,965
Volume Pricing
Request Quote
注意: 本項目需要搭配配件使用 | 進一步瞭解
下載產品資料
Operating Current (mA):
≤50
Operating Temperature (°C):
-10 to +45
Operating Voltage (V):
5 DC ±5%
Output Power (mW):
4.5
Pointing Stability after Warm Up (mrad/°C):
<0.005
Power Stability (%):
<2
Wavelength (nm):
655.00
Laser Class - IEC:
3R
Wavelength Tolerance (nm):
±10
Output Power Tolerance (%):
±5
Power Supply:
Power Supply Required and Sold Separately:
USA: #59-099
Europe: Not Available
Japan: #59-099
Korea: Not Available
China: #59-099
Mean Time To Failures MTTF @ 25° (hours):
>115,000
Wavelength Stability (nm/°C):
0.25
Modulation Frequency (kHz):
DC to 300kHz (at 95% modulation depth to -3dB)
Beam Size at Nearest Focus (μm):
<45
Pointing Accuracy (mrad):
≤10 at Factory Set Focus
Electrical Leads/ Pin Connections:
red (+V), black (-), yellow (Vcontrol), green/yellow (case)
Note:
Includes: Users Manual, Warning Label, Wire Harness, and Focus Key
Beam Diameter (mm):
5.5 x 2.5 at Aperture
Output Type:
Free Space
Type of Laser:
Diode
Beam Divergence (mrad):
<0.2 Typical
Laser Class - CDRH:
IIIa
Color:
Red
Focus Range:
50mm - ∞
Length (mm):
47.00

Regulatory Compliance

RoHS 2015:
Reach 224:
Certificate of Conformance:

產品系列說明

  • Stable Output
  • 真正的開/關脈衝控制
  • 線性幅度或時間調變
  • Low Power Consumption
  • EMC/ESD Shielded
  • Focusable

This new design uses advanced circuits and components to eliminate unwanted variations in output. A single input allows the light intensity to be set using a simple resistor or voltage source. The output can be modulated rapidly with any arbitrary waveform. The module contains an industrial quality laser diode with built-in monitoring photodiode. An efficient processor controlled driver circuit is fully protected and matched to the diode. The stable adjustable focus lens mounting and case is electrically isolated from the electronics. A 4-way connector provides supply, control, and shielding inputs. Meet IEC60825 certification, in accordance with CDRH. Applications include: vision systems, telemetry, sensors, laboratory testing, and dynamic lighting.

A power supply, sold separately, is required for operation.

 
Sales & Expert Advice
 
or view regional numbers
Easy-to-Use
QUOTE TOOL
enter stock numbers to begin